Horizontal Shaft, Double Suction Centrifugal Pumps (SNDS)

Technical Specifications

- Suction and discharge flanges conform to EN 1092-2 PN 16 or PN 25.

- Suction and discharge flanges are on the same axis in the lower body. Pumps can be divided into two in the horizontal plane.

- Because of these characteristics when it is necessary to remove the rotor assembly for maintenance and repair it is not need to remove the pump off the piping installation.

- The pump impellers have double suction. This feature increases the suction ability of the pump and allows for balancing of the axial hydraulic forces.

- Pump impellers have been balanced according to ISO 1940 class 6.3.

- Sealing is provided by the soft seal. Optional mechanical seal can be applied.

- In standard manufacture the direction of rotation of pump is clockwise when viewed from the motor side.

- Upon request, the direction of rotation can be manufactured in counterclockwise direction. In this case, the location of the suction-discharge flanges changes.

1 Bushing Key

2 Volute Body Upper Side

3 Wear Ring

4 Impeller Key

5 Air Bleed Plug

6 Impeller

7 Air Bleed Plug

8 Spacer Bushing

9 Seal Watering Pipe

10 Soft Seal

11 Seal Thrust (Glen)

12 Ball Bearing

13 Bearing Cap

14 Coupling Key

15 Shaft Wear Sleeve

16 Bearing Races

17 Seal Box

18 Pin

19 Drain Plug

20 Volute casing Lower

21 O-Ring

22 Watering Ring

23 Shaft Wear Sleeve

24 Water Splash Disk

25 O-Ring

26 Tightening Nut

27 Pump Shaft

28 Outer Bearing Cover

29 Inner Bearing Cap

30 Grease Nozzle

31 O-Ring

32 Mechanical Seal Cover

33 Mechanical Seal

دیگر محصولات تخصصی این شرکت عبارتند از :

پمپ روغن داغ

وارد کننده پمپ روغن داغ

فروشنده پمپ روغن داغ

پمپ روغن داغ ترکیه

پمپ روغن داغ نورم

پمپ روغن داغ نرم ترکیه 350 درجه حرارت

انواع پمپ